This product not only has excellent mechanical properties, but also has good temperature resistance, corrosion resistance, flame retardant, dimensional stability and easy processing and molding. Wide range of applications.
全国服务热线：400-928-3323
Product information
PPS SSA510-GM60 Fiber glass and mineral-enhanced PPS | ||
| Features | General purpose,Good mechanical performance,high temperature resistance, high size stability,injection molding. |
Application | Gasket ring，Pump housing,Electronic product shell，Electronic baking tray， etc. | |
Technical parameter
Performance（23℃） | Test method | Unit | Data | |||
Physical | ||||||
Density | ISO 1183 | g/cm³ | 1.88 | |||
Water Absorptio | ISO 62 | % | 0.02 | |||
Molding Shrinkage(horizontal) | ISO 294-4 | % | 0.2 | |||
Molding Shrinkage(vertical） | ISO 294-4 | % | 0.6 | |||
Flame Rating | UL-94 | Class | V-0 | |||
Mechanical | ||||||
Tensile Strength | ISO 527 | MPa | 175 | |||
Strain at Break | ISO 527 | % | 1.2 | |||
Flexural Strength | ISO 178 | MPa | 280 | |||
Flexural Modulus | ISO 178 | GPa | 16 | |||
Izod Impact Strength | ISO 180 | kJ/m² | 6 | |||
Thermal | ||||||
Heat Deflection Temperature（1.80MPa） | ISO 75 | ℃ | 270 | |||
Melt Flow Index | ISO 1133 | g/10min | 65 | |||
Electrical | ||||||
Volume Resistivity | IEC 60093 | Ω·m | 1E14 | |||
Dielectric Constant | IEC 60250 | 23℃/1MHz | 5 | |||
Dielectric Loss Angle | IEC 60250 | 23℃/1MHz | 0.002 | |||
Tracking Resistance | IEC 60112 | V | 175 | |||
Injection molding | ||||||
Pre-drying | Temperature | ℃ | 120-140 | |||
Hours | h | 4-6 | ||||
Die Temperature | 130-150℃ | |||||
Barrel Temperature | Injector | Front | Middle | End | ||
300-330℃ | 300-330℃ | 300-330℃ | 290-320℃ | |||
Note: This property is the internal testing data of the company. It is recommended that users evaluate the applicability and safety after trial according to the specific application situation to ensure that the product meets the requirements.